Make your own cassette speed modification


These cheap tape players are pretty lofi. They’re full of noise, they’re mono, and their playback and recording quality is… kinda crap. However, they are really easy to add a basic speed modifier control, because many of them have an accessible speed-calibration trimmer.

I made a short video tutorial to walk through the process:

Notes

I used one of these cassette players its cheap and easily available at the moment.

It’s worth noting: you’ll see that only half the length of the fader has any control over speed. At a guess, I would say that 10k is too big a value for the potentiometer. If I were to try again, I’d use a 5k value and see if that gives me more control.

Also, just to clarify, this is a lofi mod, and its meant to be quick and easy. A better solution would be to wire it up to swap the trim-pot rather than run it in series. But this was faster and easier.

If you try this yourself, or have any suggestions for improvements, I’d love to hear about it: hit me up in the video’s comments.